#1 in Quality Products
#1 in Quality Products
4.78 / 5.0
58 Reviews
NDS CC 700 Compression coupling (fits .680 to .704 OD tubing i.e. A 700) Order 25 for bag.
4.78 / 5.0
58 Reviews
NDS AccuFlow 1 GPH Pressure Compensating Drip Emitter (Black) AccuFlow AFPC 10 is a 1 gph pressure compensating emitter with 1/4" barbed inlet and ...
View full details4.78 / 5.0
58 Reviews
PVC S&D 45° Elbow, 4 in. Hub X Hub The 4 in. PVC Elbow makes a 45° turn in 4 in. sewer and drain (S&D) pipe runs. The 45° Ell also con...
View full details4.78 / 5.0
58 Reviews
NDS AccuFlow 2 GPH Pressure Compensating Drip Emitter (Red) AccuFlow AFPC 20 is a 2 gph pressure compensating emitter with 1/4" barbed inlet and a ...
View full details4.78 / 5.0
58 Reviews
Attach IPS pipe to SDR-9 CTS pipe to direct water flow through the irrigation system with the Flo-Lock™ PVC Gripper Adapter, 1 in. IPS Spigot ...
View full details4.78 / 5.0
58 Reviews
PVC S&D Cap, 8 in. Seal the end of 8 in. Sewer and Drain (S&D) pipe with the 8 in. PVC S&D Cap. This cap is used to stop the flow ...
View full details4.78 / 5.0
58 Reviews
Stormwater that can’t properly drain not only creates a big, mucky mess—it can also lead to soil erosion, slippery and unsafe surfaces, and irrever...
View full details4.78 / 5.0
58 Reviews
Does your lawn or downspout areas flood from rain? Soggy lawns and murky puddles aren’t just eyesores—it can lead to soil erosion and costly proper...
View full details4.78 / 5.0
58 Reviews
Agrifim 1/2" Drip Distribution Tubing A700/500 PE (0.600" ID x 0.700" OD) Black 1/2" Polyethylene Tubing - A700/500 500 ft coil This black...
View full details4.78 / 5.0
58 Reviews
Enhance your outdoor living space with an attractive drain grate that protects your drainage system. The Slim™ Channel Drain Grate blocks leav...
View full details4.78 / 5.0
58 Reviews
NDS CT 700 Compression Tee (.680 to .704 OD tubing i.e. A 700) Order 15 for bag
4.78 / 5.0
58 Reviews
Use the Micro™ Channel Drain End Plug to seal either end of the micro channel drain. Works with the Micro Channel Drain system to capture and conve...
View full details4.78 / 5.0
58 Reviews
PVC S&D Tee, 4 in. Hub X Hub X Hub The 4 in. PVC Tee adds a 90° branch to a 4 in. sewer and drain (S&D) pipe run, and connects three l...
View full details4.78 / 5.0
58 Reviews
Insert Connector 1/4" C 250 DESCRIPTIONNDS Professional Irrigation is a line of efficient drip and micro-irrigation products that offers complete, ...
View full details4.78 / 5.0
58 Reviews
Agrifim 1/2" Drip Distribution Tubing A700 PE (0.600" ID x 0.700" OD) Black 1/2" Polyethylene Tubing - A700 This black, flexible tubing is us...
View full details4.78 / 5.0
58 Reviews
NDS Dura Slope Trench Drain Sections The NDS Dura Slope trench drain system consists of neutral and pre-sloped sections of trench drain. Manufactur...
View full details4.78 / 5.0
58 Reviews
PVC S&D Coupling, 4 in. Hub x Hub Connect two lengths of 4 in. Sewer and Drain (S&D) pipes together with the 4 in. PVC S&D Couplin...
View full details4.78 / 5.0
58 Reviews
Agrifim PRM 30 30 psi, 3/4 FIPT pressure regulator (2 - 20 gpm flow range)
4.78 / 5.0
58 Reviews
Make the installation of your catch basin or low-profile adapter to your drainage system quick, easy, and worry-free. The Locking Outlet Adapter fe...
View full details4.78 / 5.0
58 Reviews
PVC Downspout Adapter, 2X3 in. Downspout X 3 in. DWV/SCH40 Hub The PVC Downspout Adapter connects 2 in. X 3 in. rain gutter downspout to 3 in....
View full details4.78 / 5.0
58 Reviews
Essential to every drainage system is a point of release to prevent back-up issues. Use the Pop-Up Drainage Emitter to safely discharge collected w...
View full details4.78 / 5.0
58 Reviews
The Pop-Up Drainage Emitter discharges stormwater captured upstream by catch basins, channel drains, and other drainage solutions and carried downs...
View full details4.78 / 5.0
58 Reviews
NDS's Barbed Insert Fittings are easy to install and compatible with 17mm tubing. Clamps are not required at pressures less than 50 psi. Product De...
View full details4.78 / 5.0
58 Reviews
Agrifim CMAP 700 3/4 MIPT drip adapter (fits .680 to .704 OD tubing)
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}