News

The fundamental difference in these types of cutters are a rounded corner on the semi chisel and a square corner on the full chisel. The rounded corner provides a slightly smoother less aggressive cut while the square corner is all...

The pitch of the chain is the distance between the drive links. To determine the pitch you simply measure the distance from one rivet on the drive link to the same rivet on the adjacent drive link. As shown below (fig.a) you measure the...

There are two different gauge measurements that you need to know when looking for your bar and chain. Pictured below (fig. a) is a drive link and a reference to how the gauge is determined. The thickness of the drive link...

Chain saw chain has four basic parts that arecommon and consistent throughout the chainsaw world. In the picture on the left (fig. a) yousee these four basic parts. The Cutter, DriveLink, Tie Strap and Rivet make up a chain sawchain....

SHARPENING CHAIN SAW CHAIN Chain Sizes: File Sizes:1/4 = 5/32 file, 3/8 LP = 5/32 file, .325 = 3/16 file, 3/8 Standard = 7/32 file**Sharpening of Chain saw chain has a few basic instructions in order to be successful** Choose...

Debris comes in all shapes and sizes, but the ones that fall from trees are some of the worst for your drainage system. Installing catch basins under downspouts is a best practice for managing stormwater and protecting property. Downspout drainage...

KING 900 Advanced Digital Cable, Wire & Valve Locating System FEATURES:• Tracks metallic cabling and buried AC power lines CATV, electrical, telephone, sprinkler or lighting wire• Inductive mode capability: inductive clamp and inductive antenna modes• Dual direct connect frequencies (2kHz, 33kHz) and adjustable...

COPPERHEAD ADVANTAGE Features & Benefits Premium-grade, high carbon steel for better performance and extended blade life Blades are austempered for optimal hardness and durability ISO 9000 certification guarantee rigid quality standards in all areas of blade manufacturing Tested for safety,...